Airpods Connecting While in Case Issue? Try These Fixes

AirPods are Apple’s flagship headphones that allow you to connect to your other Apple devices wirelessly. Because of the long-lasting battery, you may listen to music and make calls for hours on end. You can connect your AirPods with your other devices because they are an iCloud device linked to your Apple ID.

When connecting your AirPods to previously linked devices, like as your iPhone, just remove the AirPods from the case and they will connect to your iPhone, iPad, or Mac. When you put your AirPods back into the case, they should reconnect and begin charging right away.

When you put your AirPods back in their case, they may still be linked to your smartphone. This can be inconvenient since you can’t transport music from your iPhone to your external speaker until Bluetooth devices are turned off. When your AirPods don’t disconnect when you put them back into their case, there are a couple things you may do.

Also Read: Are Apple Products Worth it?

Why Do My AirPods Connect When They’re in The Case

Software Issue

Your AirPod or AirPod Pro connects while in the case due to a software issue. There might be a flaw in the software that prevents the AirPods from keeping connected when this is the case. To cure this malfunction, do a hard reset to refresh the system and resolve the software problem.

There’s a Charging Problem With The Case

If your case or the AirPods themselves aren’t charging properly, the AirPods may connect to your iPhone or any other Apple device while still in the case. If your AirPods are unable to be charged, they will always be removed from their case and ready to connect. Lint and other dirt particles may become caught in the charging mechanism of your case over time, preventing it from charging when you connect your lightning connection. Cleaning the data port is simple; but, if your case still does not charge after cleaning, the data port is most likely entirely ruined.

Bluetooth Is Still On

If you leave your Bluetooth on while your AirPods are in the case, they may reconnect to your smartphone. Although they should disconnect as soon as they are placed in the case, if they do not, this might be an indication of a software problem, which is more likely to occur when your Bluetooth is switched on. Because your iPhone is always looking for devices to connect to, if it detects that your AirPods have turned for a little length of time, even if they are still in your case, it will connect to them.

They’re Charged To 100 Percent

Another issue that might be causing your AirPods or AirPods Pro to connect at random while in the case is whether or not they are completely charged. When your AirPods are completely charged, they may detach, which means that any Bluetooth device to which they have previously been paired may reattach to them. Although your AirPods should continue to charge while in their case, even when fully charged, they may connect at random. There’s not much you can do about it except remove them before they’re fully charged.

AirPods Case Is Open

If you leave your AirPods case open, it may randomly connect to other devices. Although your AirPods should not connect to other devices while the case is open, doing so may cause them to split from the case and connect to your iPhone for a short amount of time. Close the cover to prevent your AirPods from disconnecting at random.

How To Know Why Your AirPods Are Connecting While They’re In The Case

If you’re curious about why your AirPods are sporadically connecting to your phone, there are a few tests you can do. If you can narrow down the source of the problem, you’ll have a better understanding of why it’s happening. If it’s something you can change, you’ll know where to begin. If it isn’t, that’s OK.

Also Read: How to Remove Apple ID from iPhone/iPad without Password?

Check If They Can Be Charged

If you enter your AirPods and discover that they cannot be charged, it is fair to presume that the charging mechanism is malfunctioning. This will explain why they are still connecting to your iPhone. When you place your AirPods in the case, they are labelled as charging and are unable to connect to other devices. When your AirPods can’t charge, they’ll keep connecting to any nearby devices. If your AirPods charging system is malfunctioning, you should consider repairing it.

Did They Randomly Connect A While After Being In The Case

If your AirPods reconnect to your Apple device after being in the case for a while, this signals a software problem. Glitches and software errors occur on a regular basis, and this gets more evident after you’ve had your AirPods for a while. It’s most likely a random issue if your AirPods first detached when you put them in your case, then randomly connected while in the case. There is nothing you can do to prevent this from happening, other than resetting your AirPods or updating the firmware.

How To Fix AirPods Connecting While In Case

1. Turn Off Bluetooth

Turning off Bluetooth on your smartphone is the first thing you can do to stop this. This will cause the AirPods to disconnect because they require a Bluetooth connection to connect. To turn off Bluetooth on your device, go to the settings menu and disable it. If the issue remains, having to turn off Bluetooth each time will get tedious.

2. Close Your Case

Because your AirPods can connect to your smartphone while they are open, you should always close your case while storing them. Closing the case allows them to start charging, so don’t expect your AirPods to disconnect from your iPhone if you put them in there without closing it. Even if they were initially disconnected, opening your case briefly may cause them to rejoin while still within the case.

3. Reset AirPods

If this problem persists, you will need to reset your AirPods. A factory reset will clear the settings on your AirPods and return them to their original configuration. This means your AirPods will be in the same condition as when you first bought them. This will allow you to resolve any software issues with your AirPods.

To reintroduce the AirPods:

  1. For one minute, press and hold the setup button on the Charging Case.
  2. When the status light flashes orange and then white, release the setup button.
  3. The AirPods have now been returned to their original factory settings.

Connect your AirPods to your smartphone once you’ve reset them, and then put them back in the case to check whether they disconnect.

4. Reset Network Settings

If you’ve reset your AirPods and still can’t find a solution, the problem might be with your smartphone. To troubleshoot connectivity issues on your iPhone or iPad, first clear the network settings. When you clear the network settings, you also clear the Bluetooth, WIFI, and cellular settings.

To re-establish network settings:

  1. Start the Settings app.
  2. Choose General.
  3. Scroll to the bottom of the page and click Reset.

After you’ve restored your iPhone’s network settings, you may connect the AirPods through Bluetooth and place them back in their case. When you replace your AirPods in their case after resetting your network settings, they should reconnect.

5. Un-pair and Reconnect:

If restarting the AirPods doesn’t work, try disconnecting them from your smartphone and reconnecting them from the beginning. This will update any firmware issues with your AirPods and may repair the connectivity problem you’re having.

  1. Open the Settings app on your iPhone.
  2. From the menu, choose Bluetooth.
  3. Under My Devices, tap the Information button, which looks like a ‘I’ surrounded in a circle next to your AirPods.
  4. Choose the option Forget about this device.
  5. Press the Forget Device button to confirm your action.
  6. The AirPods will be disconnected from the smartphone.
  7. The first stage of un-pairing is finished. After that, put the AirPods in their charging case and make sure they’re fully charged. Follow the on-screen prompts to reconnect your AirPods.
  8. Place your iPhone next to the charging case for your AirPods.
  9. Tap Connect in the Control Centre pop-up that appears.
  10. After you’ve linked your AirPods, put them back in their case and check to see whether they’re still randomly connecting to your iPhone.

6. Get the AirPods Battery Replaced:

It’s conceivable that your AirPods are connecting while the case is closed due to a low battery. In this case, changing your batteries may cure the problem. If your AirPods are still under warranty, you may get their batteries replaced for $49 each. However, if they aren’t covered under warranty, battery replacement will cost you $69 each.

To avoid any harm, make sure you get it done from a legitimate business. This troubleshooting is expensive, but it ensures that the AirPod will no longer have connectivity difficulties. If both AirPods are experiencing battery troubles, do not replace the battery; instead, replace the AirPods, which will cost you somewhat more than the battery replacement.

7. Update Your AirPods Firmware

Firmware is the software that is installed in your AirPods and may be updated to resolve issues such as your AirPods not connecting when the case is closed. It’s recommended to maintain things up to date because older firmware might create connectivity issues. Your AirPods firmware should be up to date and automatically updated, but if it isn’t, you may manually upgrade it using a simple method.

Before attempting to repair the connectivity issue by upgrading the software, make sure your Airpods are linked to your iPhone. This may be confirmed in Bluetooth Settings.

  • Go to the Settings menu.
  • Scroll all the way down to the General section.
  • Scroll down and click on About to look for your AirPods.
  • Check the firmware version that is currently in use.

If you want to update them, connect them to your smartphone first, then place the charger into the case and close it. After that, you must leave the AirPods alone for the night in order for them to update. You will have to wait because there is no other physical action you can do to update them.

8. Forget Your AirPods as a Device from your iPhone

The next step is to unplug your AirPods from your iPhone. When you leave a Bluetooth device at home, the connection between the two devices is broken. When you reconnect, your iPhone will recognise it as a new device.

Because there might be a fault that is causing your AirPods to connect to it at random, ignoring the devices may address any bugs that are causing this to happen.

Toss aside the idea of utilising your AirPods as a Bluetooth device:

  • Navigate to the Settings menu.
  • Bluetooth should be selected.
  • In the Bluetooth menu, choose your AirPods from the Devices section.
  • Press the I button next to your AirPods.
  • When the alert appears, click the Forget Device button.

After that, replace your AirPods in their case and observe what occurs.

9. Clean the Cases Charging Port

In this case, the next thing you may do is clean the charging port on your AirPods. Lint and dirt get stuck in charging ports all the time, especially if you keep the case in your jeans. Because there is usually lint at the bottom of the pockets of jeans.

Avoid using anything moist or metal before learning how to clean the case, as this might cause a short circuit and irreversibly destroy your AirPods case.

Follow these procedures to clean the charging port:

  • Get a toothpick or a static brush.
  • Using a scraper, remove the dirt.
  • It should charge when you attach your lightning cable to the casing.

If this step fails, move on to the next.

10. Restart your iPhone

Restarting your iPhone will update the software that it is running on. If there is a bug or malfunction causing problems with your AirPods, restarting your iPhone may remove it, resolving the problem.

11. Force Restart

If you still can’t get your AirPods to stop randomly connecting, restart your iPhone. When you force restart your iPhone, it turns off and then restarts. While your AirPods are still in the case, this may remove bugs and malfunctions that are causing connectivity issues.

Also Read: There Was An Error While Preparing to Share

For iPhone 8 or Later:

Quickly press and release the volume up and volume down buttons in quick succession. Then, hold down the sleep/wake button until the Apple logo appears on the screen.

For iPhone 7 & 7 Plus:

For at least 7-10 seconds, hold down the sleep/wake button and the volume down button. Before releasing them, wait until the Apple logo appears on the screen.

For iPhone 6 Plus & Previous Models:

For 10 seconds, hold down the home and side/top buttons (depending on the model). Before releasing them, wait until the Apple logo appears on the screen.

12. Update Your Software

Apple’s iPhone is constantly upgraded and improved. The hardware on the newer iPhone models is obviously different, but so are the new features on the latest iOS versions as a result. When dealing with issues or problems, it’s usually a good idea to upgrade your programme to the most recent version available on the market. This has been reported to prevent your AirPods from connecting to your phone at random.

13. Suck Out The Charging Port

Although it may appear unusual, sucking out the charging port on your AirPods case may help with this issue. If your AirPods are not charging, they will remain connected to your iPhone until you turn off Bluetooth. You merely need to firmly plug the end with your lips and such to guarantee that they may charge and remove as soon as they’re inserted. This approach is helpful if you don’t have any compressed air to blast it out. Because lightning ports may become clogged with a variety of junk, doing so will simply remove any debris that has been lodged inside.

14. Contact Apple Support

If you’ve tried everything and still have a problem, it’s possible that there’s a deeper problem that can’t be solved using troubleshooting approaches. In this case, you’ll need to contact Apple support to get this addressed. This is expected to happen after several years of using your AirPods, so don’t be startled by the unfortunate situation. After around three years of wearing AirPods, whether the Pro or the first-generation, problems start to emerge.

Most AirPods come with a full year’s warranty, so if you need to take them to the Apple store, they’ll almost probably be replaced for free. When diagnosing the problem with your AirPods on the website, just choose the case and any qualifiers related to the connection issue.

Also Read: How to Know If Someone Hides their Story From Your Instagram

Leave a Comment