You can easily enable it through a few easy steps. To activate the built-in keyboard, go to the Start menu and select the keyboard area. Right-click on the keyboard and select Uninstall the device. Select OK to confirm the removal. The laptop’s keyboard won’t be able to function after the restart. To enable it again take the same steps that you previously mentioned.
The first step is to identify the laptop’s hardware identification. Then, you can disable it by following the procedure. In Windows 10, the keyboard driver is disabled automatically. To disable it, open the computer Configuration and then click Hardware. Then, select the Devices tab and then choose the option that reads “Keyboard device” and then select disable. After the keyboard has been disabled, click OK to deactivate the device. Your laptop’s keyboard should be turned on again.
You can also deinstall the drivers using your Command Prompt as administrator to do the procedure manually. After the drivers have been removed and reinstalled, you can install the drivers in order to activate your use of the keyboard on your laptop.
Enable Your In Laptop Keyboard
Table of Contents
If you’re not sure of how to turn on the keyboard on your computer keyboard You can remove the driver from the Device Manager. To do that, go to Control Panel > Hardware and choose the Hardware tab. Under the Devices tab, click on the Standard PS/2 Keyboard icon. This will cause your keyboard to be inactive. After restarting is complete, you need to install the drivers for the hardware. After this, you’ll be able to utilize the device.
After deleting the driver for the keyboard then go back to the System Configuration window and then click the Bluetooth icon. After the driver has been installed, restart your computer. After rebooting, your keyboard should function as expected. If this is however not so, attempt to reinstall the keyboard. Make an account to restore your system and then try using the keyboard again. Before you do this go through the settings to ensure that it’s functioning correctly.
Keyboard Device Manager
To uninstall to remove the drivers for the keyboard To remove the keyboard driver, launch the Device Manager and double-click on the device. On the General tab, select that option. Then, select Universal Serial Bus controller. Double-click the keyboa